Hishine LED Lighting Manufacturer

Hishine H Series Auto-Cleaning All-in-One Solar LED Street Light

Integrated 80W-150W solar LED street light with automatic brush cleaning, LiFePO4 battery capacities from 768Wh to 1536Wh, smart solar control, and T2/T3 roadway optics.

Power 80W-150W
IP Rating IP66
Warranty Project-specific warranty terms
Certifications Certification options available by destination market and project requirements
Luminous Efficacy Project configuration dependent
Share With:infx@

Features

01

Automatic Brush Cleaning

The integrated brush system helps remove dust from the solar panel surface to support charging performance in dusty locations.

02

All-in-One Integrated Design

Solar panel, LED module, LiFePO4 battery, and controller are integrated to simplify site installation and reduce trenching.

03

Large LiFePO4 Battery Options

Quoted battery capacities range from 768Wh to 1536Wh for different wattages and project operating schedules.

04

T2 and T3 Roadway Optics

Road-oriented distributions support more useful light placement along streets and outdoor access routes.

05

Smart Solar Operation

Automatic dusk-to-dawn operation, timing, dimming, and optional motion sensing help manage stored energy.

Specification

Compare the quoted configurations below. Final selection should be confirmed against the project layout, target illuminance, voltage, controls, and certification requirements.

Model Power LED Chip Luminous Flux LED Qty Beam Angle IP Rating Weight Dimensions Input Voltage Driver
HS-SSL80W-H 80W LED module T2 / T3 Outdoor IP rated 1274 × 501 × 108 mm 12.8V / 768Wh battery 90W 18V solar panel
HS-SSL100W-H 100W LED module T2 / T3 Outdoor IP rated 1574 × 501 × 108 mm 12.8V / 960Wh battery 110W 18V solar panel
HS-SSL120W-H 120W LED module T2 / T3 Outdoor IP rated 1874 × 501 × 108 mm 12.8V / 1152Wh battery 140W 18V solar panel
HS-SSL150W-H 150W LED module T2 / T3 Outdoor IP rated 2174 × 501 × 108 mm 12.8V / 1536Wh battery 180W 18V solar panel

Procurement note: Prices are not published on this page. Request a project quotation with quantity, destination, voltage, optics, controls, mounting accessories, and certification requirements.

Optics

IES photometric files and DIALux support are available for project evaluation. Contact Hishine with mounting positions, heights, spacing, and target illuminance.

Applications

Recommended project applications include:

  • Municipal and rural roads
  • Remote off-grid roads
  • Industrial park roads
  • Parking lots
  • Parks and public pathways
  • Residential and government solar projects

Video

Product video can be added here when available.

FAQ

The available range is 80W-150W. Final model selection should consider mounting height, spacing, target illuminance, operating hours, input voltage, and the required control method.

The quoted configuration uses High-efficiency LED module LEDs with Project configuration dependent luminous efficacy. Alternative LED or driver configurations should be confirmed before ordering.

Available optics are T2 / T3 roadway optics. Hishine can recommend a distribution after reviewing pole or mounting positions, road or floor geometry, and the target lighting level.

The standard quoted input is 12.8V battery system with MPPT solar controller. High-voltage, dimming, or branded-driver requirements should be stated in the inquiry.

The listed protection is outdoor IP-rated protection subject to final configuration. Suitability for coastal, corrosive, high-temperature, cold-storage, vibration, or wash-down environments must be checked against the final project configuration.

Dusk-to-dawn, timing, dimming, and optional motion-sensor control are available. Control accessories and protocols are optional unless explicitly included in the final quotation.

Please provide mounting height, pole or ceiling layout, spacing, application dimensions, target lux level, operating schedule, ambient conditions, supply voltage, and quantity.

Yes. IES photometric files and DIALux support are available for project evaluation. Please share the site drawing, mounting positions, heights, and target illuminance.

The current warranty basis is Project-specific warranty terms. Warranty terms depend on the selected LED, driver, controls, working conditions, and final order configuration.

Please send the model or wattage, quantity, destination market, input voltage, color temperature, beam distribution, control requirements, certification needs, mounting accessories, and expected delivery schedule.

Project Inquiry

Need a lighting solution for your project?

Send us your project details, including installation height, application area, quantity, voltage, and certification requirements. Hishine will recommend a suitable LED lighting solution.