Guide for LED high bay lights in production area


For ordinary consumers, our choice of products may be more considering the price of the product, followed by the appearance quality, and so on, sometimes the price exceeds the budget, will choose to give up the purchase of the product. However, the industrial choice of LED mining lamps must put the price factor light, not do not pay attention to price, but choose more cost-effective products. How can we choose products that better suit our needs? Here is a brief introduction to the purchase method.

  1. Choose according to actual demand

Like coal, petroleum, chemical and other industries, when choosing mLED high bay lights, we must not only consider whether the lighting needs can meet the requirements, but also dustproof, waterproof and other factors, and even need to consider explosion-proof requirements. This restricts our choice of LED lamps the first major element, the purchase of general mining lamps, in terms of energy saving can not meet the requirements, buy lights cheap with lights expensive; The choice of ordinary LED lamps may be acceptable in price, but the use of safety is not guaranteed, the replacement of lamps on two or three days will bring a lot of inconvenience to our work, the general factory floor is relatively high, and the replacement of lamps needs to use professional escalators or lift trucks, which increases our invisible input cost. Therefore, such enterprises need to consider whether the product meets the requirements of national quality standards, whether it has passed the explosion-proof certification and other factors.

2., consider the comprehensive cost choice

LED high bay lights, especially LED high bay lights that have passed explosion-proof certification, military certification, quality system certification, etc., because they will strictly implement national standards in production and material selection, and will not use shoddy means to reduce product costs, the price may be higher than that of general lamps. However, the purchase of an investment in exchange for high-quality products, the use of not only saves the cost of electricity, but also saves the cost of secondary purchase, maintenance and replacement of lamps, the key is to provide a reliable guarantee for our safe production. Therefore, the choice of light mining lamps that have passed explosion-proof certification, military certification and product quality system certification is the most cost-effective, and is your most sensible choice.


3., appropriate power, illumination and color temperature

This is particularly professional, LED high bay lights power to choose according to the actual lighting area, high power will cause a waste of electricity resources, low power and can not meet the lighting needs, light due to LED high bay lights products will give you the most appropriate choice according to your actual needs; In addition, luminaire illuminance, color temperature and other conditions are also very important, the production line requires high resolution, like the textile industry needs high-resolution lamps, which is we will recommend the use of color temperature value of about 6000, illuminance and other conditions are in line with the requirements of the product. Light because lighting will be tailored to your needs, and to recommend you the most cost-effective solution.


Hishine H5 industrial Commercial Lighting Indoor Workshop 100w 150w 200w Ufo DOB Led High bay Light Factory Price

Microwave Sensors Indicate

1.Not recommended for outdoor use. Rain can trigger it by mistake.

2.They become less responsive to objects moving at constant speed.

3.No vibration in the mounting position.

4.Require power supply ripple less than 100mv

5.The range and angle of the sensor will be affected by the surrounding environment o

6.Microwaves have a penetrating effect, but not through reinforced concrete walls or metal objects o Single core wire is recommended for terminal.