What is requirements for the use of high bay lamps in workshop

high bay lamps: lamps used in the production and operation areas of factories and mines. In addition to the various lighting used in the usual environment, there are explosion-proof lamps and anti-corrosion lamps used in special environments, and high bay lamps are used in some large high-rise buildings.

What is requirements for the use of high bay lamps in workshop插图
H2 LED UFO High Bay Light Applications
What is requirements for the use of high bay lamps in workshop插图1
h5 UFO high bay light


General lighting is usually evenly arranged above or on the side wall of the work site, lighting the entire working face, the need to use large power incandescent lamps, halogen tungsten lamps, high-intensity gas discharge lamps or a large number of fluorescent lamps. Most of the mining lamps belong to this category. General lighting has higher requirements for the distribution of light, and two types of light distribution, direct lighting and semi-direct lighting, are widely used, especially the latter. Part of the semi-direct lighting type emits upward light to illuminate the ceiling, which can increase the brightness of the ceiling and create a more comfortable and brighter environment.

Local lighting is a lamp that improves the illumination of a certain working part. Its role can be to strengthen and supplement lighting on the basis of general lighting, or it can be used as temporary lighting in places that do not usually need lighting (such as equipment maintenance and maintenance places). For most of them, the light distribution is not strictly regulated. Local lighting is usually installed near the working area to use safe ultra-low voltage (≤50V, AC RMS) incandescent lamp, halogen lamp as the light source. There are (portable) row lights, hanging lights, working desk lamps, machine tool working lights, etc. In some tall factories, sometimes also use floodlights for local lighting.

In order to meet the visual needs of different production operations and the needs of lamp installation conditions, the reflector of the mining lamp should be able to produce a variety of wide and narrow light distribution. The surface is painted, glazed to make it white, and reflectors made of aluminum, glass, prism glass and other materials can obtain a wide light distribution, suitable for large areas, vertical or near-vertical workplaces. For tall factory buildings and tall machine tools requiring separate lighting, reflectors made of materials with strong light control properties such as prism glass, mirror glass and polished aluminum can be used to obtain narrow beam distribution.

In order to work reliably in places with poor environmental conditions such as dusty and humid, mining lamps have special requirements in terms of structural design, housing and reflectors. In dusty environments, closed lamps or convection lamps with upward light pass should be used (see figure); In humid environment, attention should be paid to the tightness of the shell and the surface treatment of the reflector; General indoor commonly used open lamps, the use of enamel surface reflectors, surface alumina film layer is thick or coated with silicon dioxide protective film aluminum reflectors; Taking into account the inevitable vibration in the production site, the fixed light source should be anti-loose lamp holder, and so on. There are many ways to fix the mining lamp. General lighting has the form of suction top, embedding, lifting (using straight pipe or chain) and suction wall. Removable local lights are equipped with corresponding hooks, handles, clips, etc.; Fixed local lights are generally firmly locked on the working machine with screws or fixing mechanisms.

What is requirements for the use of high bay lamps in workshop插图2
h5 led ufo high bay light from hishine

Microwave Sensors Indicate

1.Not recommended for outdoor use. Rain can trigger it by mistake.

2.They become less responsive to objects moving at constant speed.

3.No vibration in the mounting position.

4.Require power supply ripple less than 100mv

5.The range and angle of the sensor will be affected by the surrounding environment

6.Microwaves have a penetrating effect, but not through reinforced concrete walls or metal objects o Single core wire is recommended for terminal.


Reasons To Choose H5 LED High Bay Light?

Reason 1:- Firstly, this form of lamp has a much better lifespan than traditional incandescent and fluorescent lamp types. On average, LED lights last 10 times longer than other lights. But of course, you don’t have to waste too much time and money looking for alternatives. you don’t have to constantly replace them either. Reason

2:- In terms of LED lights, they are more energy efficient than incandescent and fluorescent lights. On average, LED lights consume only 2 to 10 watts of power, about 66% less than traditional lights. Since these lights don’t require much energy to power them, this of course helps minimize your annual electricity bill.

Reason 3:- High bay LED lights are not equipped with a filament, so they are not only more reliable, but also more resistant to drops. So of course the chances of them bursting or bursting are minimized. Reason

4:- You may be surprised to know that this form of light may seem advantageous if you want to operate climate control in your house. Note that high bay LED lights don’t use much power and therefore don’t generate much heat.


So, of course, this means that your air conditioner doesn’t seem to be being used as often to help reduce heat levels in your home. So you not only reduce the operating costs of your air conditioning system, but of course also reduce your repair costs. Reason 5:- These types of lamps produce a very white light so they have a fair amount of illumination. Of course, this helps to ensure that when operating in potentially hazardous situations these lights can produce enough light so that any hazards can be clearly seen. Many businesses have also noticed that the brighter the light that shines through workers, the more productive they are.