Find practical answers about Hishine industrial, stadium, solar, street, and outdoor LED lighting products. Search product specifications, project design support, controls, certifications, warranty, OEM/ODM, samples, and quotations.
Hishine follows a strict quality control process, including material inspection, production inspection, aging test, waterproof test, electrical safety check, optical performance test, and final inspection before shipment.
Most Hishine products are designed for long-term commercial and industrial use. Warranty terms vary by product series, application, and project requirements. Buyers can contact Hishine to confirm the exact warranty period for each model.
The E Series is available from 30W to 150W. Lower wattages such as 30W and 40W are suitable for 4-6m poles and narrower roads, while 100W to 150W options are used for higher mounting heights and wider road lighting projects.
The 3mm tempered glass lens helps protect the optical area from outdoor impact, dust, UV exposure, and weather aging. It supports more stable light transmission and is suitable for long-term municipal and commercial solar street light projects.
The bifacial solar panel is designed to improve charging efficiency by collecting more usable sunlight during daytime operation. This helps support stable battery charging in road, park, and off-grid lighting applications.
Yes. The E Series can be configured with a new lithium battery and a low-temperature option for cold regions. The final battery configuration should be selected according to project temperature, working hours, and rainy-day backup requirements.
The MPPT intelligent controller optimizes solar charging and manages discharge to improve energy use. It helps the system operate automatically and supports more reliable lighting performance for B2B solar road lighting projects.
The microwave motion sensor can reduce brightness when no movement is detected and increase brightness when people or vehicles pass. This helps extend battery runtime for low-traffic roads, parking areas, rural roads, and industrial park roads.
Optional intelligent control systems including LoRa, 4G, 2.4G, and ZigBee can be configured for project requirements. These options can support remote monitoring, grouped control, and smarter management for municipal and government lighting projects.
Yes. A solar and grid hybrid power option is available for projects that require additional reliability during long rainy seasons or limited sunlight periods. This option helps maintain lighting continuity while reducing grid energy use.
Yes. Hishine can provide IES files and Dialux simulation support for project evaluation. Please share road width, pole height, layout distance, target lux level, and application area so the team can recommend a suitable configuration.
For a faster quotation, please provide wattage or mounting height, road width, quantity, project country, working hours, rainy-day backup requirement, control options, certification requirements, and whether you need solar-only or solar-grid hybrid power.
F Series is available in 40W-150W according to the quotation data. Hishine can recommend a suitable wattage based on installation height and target lux level.
Yes. Hishine can provide IES files and lighting simulation support for project evaluation before bulk procurement.
F Series is suitable for Roads, parks, campuses, rural roads, public outdoor areas.
Yes. Hishine supports OEM/ODM customization for B2B buyers, including product configuration, branding, packaging, and project requirements.
Send your installation height, application area, quantity, voltage, certification requirements, and project schedule. Hishine sales will reply with a suitable product recommendation.
The available range is 80W-150W. Final model selection should consider mounting height, spacing, target illuminance, operating hours, input voltage, and the required control method.
The quoted configuration uses High-efficiency LED module LEDs with Project configuration dependent luminous efficacy. Alternative LED or driver configurations should be confirmed before ordering.
Available optics are T2 / T3 roadway optics. Hishine can recommend a distribution after reviewing pole or mounting positions, road or floor geometry, and the target lighting level.
The standard quoted input is 12.8V battery system with MPPT solar controller. High-voltage, dimming, or branded-driver requirements should be stated in the inquiry.
The listed protection is outdoor IP-rated protection subject to final configuration. Suitability for coastal, corrosive, high-temperature, cold-storage, vibration, or wash-down environments must be checked against the final project configuration.
Dusk-to-dawn, timing, dimming, and optional motion-sensor control are available. Control accessories and protocols are optional unless explicitly included in the final quotation.
Please provide mounting height, pole or ceiling layout, spacing, application dimensions, target lux level, operating schedule, ambient conditions, supply voltage, and quantity.
Yes. IES photometric files and DIALux support are available for project evaluation. Please share the site drawing, mounting positions, heights, and target illuminance.
The current warranty basis is Project-specific warranty terms. Warranty terms depend on the selected LED, driver, controls, working conditions, and final order configuration.
Please send the model or wattage, quantity, destination market, input voltage, color temperature, beam distribution, control requirements, certification needs, mounting accessories, and expected delivery schedule.
The available range is 100W-200W. Final model selection should consider mounting height, spacing, target illuminance, operating hours, input voltage, and the required control method.
Available optics are 60° / 90° / 120°. Hishine can recommend a distribution after reviewing pole or mounting positions, road or floor geometry, and the target lighting level.
The standard quoted input is AC100-277V with Independent-brand driver. High-voltage, dimming, or branded-driver requirements should be stated in the inquiry.
The listed protection is IP65 ingress protection. Suitability for coastal, corrosive, high-temperature, cold-storage, vibration, or wash-down environments must be checked against the final project configuration.
Optional 1-10V dimming and microwave sensor control are available. Control accessories and protocols are optional unless explicitly included in the final quotation.
The current warranty basis is 5 years. Warranty terms depend on the selected LED, driver, controls, working conditions, and final order configuration.
Hi-Flood is available in 200W-1800W according to the quotation data. Hishine can recommend a suitable wattage based on installation height and target lux level.
Yes. Hishine can provide IES files and lighting simulation support for project evaluation before bulk procurement.
Hi-Flood is suitable for Stadiums, sports fields, high mast poles, ports, airports, large outdoor areas.
The Hi-Flood E Series RGB LED flood light is available in 9 standard modular configurations from 200W to 1800W (HS-HM200W-E to HS-HM1800W-E, 1 to 9 modules), with higher-wattage custom configurations available upon request. Using high-efficacy 5050 LED chips (148–150 lm/W) and AC100-277V input, our engineering team can recommend the right wattage based on your mounting height and target illumination level.
Hi-Flood RGB offers 20°, 40°, and 60° precision beam angles to suit long-throw stadium masts, architectural facades, bridges, and wide-area landscape lighting. Hishine also provides IES photometric files and DIALux lighting simulations to help contractors and lighting designers verify uniformity and color coverage before procurement.
Yes. The fixture is built with a heavy-duty die-cast aluminum housing (available in White or Black finish), IP66 waterproof and dustproof protection, and a reliable DONE LED driver. It is backed by a 5-year component warranty for long-term outdoor operation in stadiums, ports, theme parks, and coastal or high-wind installations.
With modular power scaling from 200W to 1800W+ and vibrant RGB color-changing output, it is ideal for sports stadiums, building facades, bridges, monuments, theme parks, public plazas, and commercial landmarks that require both high-intensity floodlighting and dynamic visual effects.
Yes. Hishine supports OEM and ODM customization including housing color (White/Black), beam angle combinations, branding, and packaging. Sample orders typically ship within 3–5 working days after payment, while bulk production takes 10–25 working days. Contact our sales team with your project wattage, quantity, voltage, and application details for a fast quotation.
Hi-Robot is available in 100W-1500W according to the quotation data. Hishine can recommend a suitable wattage based on installation height and target lux level.
Yes. Hishine can provide IES files and lighting simulation support for project evaluation before bulk procurement.
Hi-Robot is suitable for Stadiums, sports fields, high mast poles, ports, airports, large outdoor areas.
Hi-Shoot is available in 400W-600W according to the quotation data. Hishine can recommend a suitable wattage based on installation height and target lux level.
Yes. Hishine can provide IES files and lighting simulation support for project evaluation before bulk procurement.
Hi-Shoot is suitable for Stadiums, sports fields, high mast poles, ports, airports, large outdoor areas.
The available range is 45W-300W. Final model selection should consider mounting height, spacing, target illuminance, operating hours, input voltage, and the required control method.
The quoted configuration uses SMD3030 or SMD5050 LEDs with 130-155 lm/W depending on configuration luminous efficacy. Alternative LED or driver configurations should be confirmed before ordering.
Available optics are Type II / Type III roadway optics. Hishine can recommend a distribution after reviewing pole or mounting positions, road or floor geometry, and the target lighting level.
The standard quoted input is AC100-277V with Hishine; Inventronics for selected 300W configuration. High-voltage, dimming, or branded-driver requirements should be stated in the inquiry.
Optional 0-10V, DALI, photocell, motion sensor, and smart controls are available. Control accessories and protocols are optional unless explicitly included in the final quotation.
The available range is 45W-250W. Final model selection should consider mounting height, spacing, target illuminance, operating hours, input voltage, and the required control method.
The quoted configuration uses SMD3030 or SMD5050 LEDs with 130 or 175 lm/W depending on configuration luminous efficacy. Alternative LED or driver configurations should be confirmed before ordering.
Available optics are 45° / 60° / 90° / 90×120° / T2M / T3M / T5. Hishine can recommend a distribution after reviewing pole or mounting positions, road or floor geometry, and the target lighting level.
The standard quoted input is AC100-277V with ZH (3030) or SOSEN (5050). High-voltage, dimming, or branded-driver requirements should be stated in the inquiry.
The listed protection is project-specific IP and impact protection. Suitability for coastal, corrosive, high-temperature, cold-storage, vibration, or wash-down environments must be checked against the final project configuration.
Optional 0-10V dimming, photocell, and motion sensor configurations are available. Control accessories and protocols are optional unless explicitly included in the final quotation.
The current warranty basis is 3 years for quoted 3030 version or 5 years for quoted 5050 version. Warranty terms depend on the selected LED, driver, controls, working conditions, and final order configuration.
Hi-Sun is available in 75W-280W according to the quotation data. Hishine can recommend a suitable wattage based on installation height and target lux level.
Yes. Hishine can provide IES files and lighting simulation support for project evaluation before bulk procurement.
Hi-Sun is suitable for Industrial and outdoor lighting projects.
Hi-Titan covers 300W, 400W, 500W, 680W, 750W, and 1500W. The 300W-680W models are available with 3030 or 5050 LED configurations, while the current 750W and 1500W datasheet configurations use 5050 LEDs. Final availability should be confirmed for each project.
The two versions use different LED packages, quantities, lumen outputs, beam selections, and driver combinations. The best option depends on target illuminance, mounting height, beam control, voltage, control requirements, and project budget. Hishine can compare both versions without publishing product pricing on this page.
The 300W and 400W fixtures measure 345 × 345 × 179 mm and weigh approximately 10.5-11 kg. The 500W, 680W, and 750W fixtures measure 495 × 345 × 179 mm; confirmed 500W and 680W weights are approximately 15-16 kg. The 1500W fixture measures 778.8 × 570.5 × 531.8 mm. Final weight drawings for 750W and 1500W should be confirmed before ordering.
The optional honeycomb louver limits direct glare and spill light, while adjustable visors shape the beam edge and block unwanted light toward stands, roads, nearby buildings, or sensitive boundaries. Both accessories should be selected together with the lighting calculation.
Current quotation options for the 3030 version include 15°, 30°, 60°, 90°, 120°, and asymmetric P50. The 5050 quotation lists 30°, 60°, 120°, and P50 for 300W-680W. Hishine can provide IES files and DIALux support; 750W and 1500W photometry must be confirmed against the final IES file.
Yes. An optional RGBW configuration supports four-color mixing, 0-100% smooth dimming, low-flicker effects, and programmable scenes for ceremonies, entertainment events, architectural lighting, and stadium atmosphere lighting.
Yes. Optional DMX512 and RDM control can support luminaire addressing, grouping, synchronized effects, scene control, and integration with gateways or a stadium lighting management platform. The control architecture should be confirmed during project design.
Hi-Titan supports 100-277V configurations and project-specific high-voltage driver options. The product platform is rated IP66 and IK08, with C4-H corrosion protection, 10kV/20kV surge options, power factor of at least 0.95, and an operating range of approximately -30°C to +50°C. Confirm the exact driver and voltage before ordering.
The product specification supports sports broadcast applications and states residual flicker below 1%. Final compliance depends on the required competition level, camera frame rate, illuminance, uniformity, glare, CRI, and control configuration. The standard product documentation lists a 5-year warranty, subject to the confirmed project configuration and warranty terms.
Please provide the application, field dimensions, mounting height, pole quantity and positions, target illuminance and uniformity, preferred wattage or chip version, input voltage, beam and anti-glare requirements, control method, quantity, certification needs, and project schedule. Hishine can then prepare a suitable configuration, IES selection, DIALux calculation, and quotation.
K11 is available in 50W-240W according to the quotation data. Hishine can recommend a suitable wattage based on installation height and target lux level.
Yes. Hishine can provide IES files and lighting simulation support for project evaluation before bulk procurement.
K11 is suitable for Warehouses, factories, workshops, logistics centers, industrial halls.
K2 is available in 100W-500W according to the quotation data. Hishine can recommend a suitable wattage based on installation height and target lux level.
Yes. Hishine can provide IES files and lighting simulation support for project evaluation before bulk procurement.
K2 is suitable for Warehouses, factories, workshops, logistics centers, industrial halls.
K3 is available in 30W-120W according to the quotation data. Hishine can recommend a suitable wattage based on installation height and target lux level.
Yes. Hishine can provide IES files and lighting simulation support for project evaluation before bulk procurement.
K3 is suitable for Warehouses, factories, workshops, logistics centers, industrial halls.
K4 is available in 50W-250W according to the quotation data. Hishine can recommend a suitable wattage based on installation height and target lux level.
Yes. Hishine can provide IES files and lighting simulation support for project evaluation before bulk procurement.
K4 is suitable for Warehouses, factories, workshops, logistics centers, industrial halls.
The warranty is typically 5-7 years depending on the selected configuration and project requirements.
Yes. Hishine can provide IES files for lighting simulation, Dialux planning, and project evaluation.
Yes. Hishine supports OEM/ODM customization for selected industrial LED lighting projects.
Common beam angle options include 60, 90, and 120 degrees, depending on the product configuration.
Yes. Hishine can support Dialux simulation and lighting layout suggestions for B2B project buyers.
K7 is available in 100W-600W according to the quotation data. Hishine can recommend a suitable wattage based on installation height and target lux level.
Yes. Hishine can provide IES files and lighting simulation support for project evaluation before bulk procurement.
K7 is suitable for Warehouses, factories, workshops, logistics centers, industrial halls.
K9 is available in 40W-300W according to the quotation data. Hishine can recommend a suitable wattage based on installation height and target lux level.
Yes. Hishine can provide IES files and lighting simulation support for project evaluation before bulk procurement.
K9 is suitable for Warehouses, factories, workshops, logistics centers, industrial halls.
The 200W model provides 30,000 lm with a 600W solar panel and 3 kWh battery. The 400W model provides 60,000 lm with a 1000W solar panel and 5.4 kWh battery.
Up to 12 hours on a full charge, depending on conditions and operating mode.
Approximately 6–8 hours in bright sunlight, depending on weather, solar irradiance and battery charge.
No permanent mains connection is needed for off-grid solar operation.
The standard telescopic mast is 6m. Customization can be discussed before ordering.
The product is specified IP65 with an operating temperature range of -20°C to +60°C. Confirm battery charging limits for your climate.
Please provide your country, application, site dimensions, operating hours and quantity.
A 3-year component replacement warranty is specified, subject to agreed terms.
Try a broader search or clear the selected category.
Send your application, installation height, quantity, voltage, optics, and control requirements. Our team will help confirm a suitable LED lighting solution.